Справочник Пользователя для Panasonic dmr-e75veb
Recording
29
[RAM] [DVD-R]
If an external equipment (for example a satellite receiver) with a
timer function is connected to the AV2 terminal of this unit by a
21-pin Scart cable (
If an external equipment (for example a satellite receiver) with a
timer function is connected to the AV2 terminal of this unit by a
21-pin Scart cable (
l 10, 16), it is possible to control the recording of
the unit with the equipment.
Preparation
≥Change the “Ext Link” in the SETUP menu to match the connected
≥Change the “Ext Link” in the SETUP menu to match the connected
equipment (
l 49).
≥Timer programming has to be done on the external equipment and
switch to the timer recording standby mode. Refer to the
equipment’s operating instructions.
equipment’s operating instructions.
[1]
Press [EXT LINK].
The unit turns off and switches to the recording standby mode.
≥“EXT L” lights on the unit’s display.
The timer recording standby mode is activated on DVD
(“EXT L” lights on the DVD unit’s display). However, the unit
may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record any media on
(“EXT L” lights on the DVD unit’s display). However, the unit
may not be turned off automatically.
≥You can play a DVD-RAM on DVD, play or record any media on
VHS even if the timer recording standby mode is activated on DVD.
≥Recording begins when a signal is received from the connected
equipment.
≥As long as a video picture is being transmitted by the external
equipment, the unit will record it.
[2]
Turn the unit off when you do not play or record
any media on VHS.
any media on VHS.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed.
recording is completed.
When the following message appears on the television screen, press
[
[
2, 1] to select “Yes” (continue recording the current programme) or
“Cancel” (cancel recording) and press [ENTER].
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
≥You can also press and hold [∫, STOP] on the DVD main unit for
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
≥You can also press and hold [∫, STOP] on the DVD main unit for
more than 3 seconds to stop recording.
≥In order to prevent accidental operation, press [EXT LINK] to
cancel the setting after recording is finished.
For your reference
≥The video being recorded automatically appears on the television
≥The video being recorded automatically appears on the television
when connected to this unit’s AV1 terminal with the 21-pin Scart
cable.
cable.
≥This function does not work with some equipment. Refer to the
equipment’s operating instructions.
≥The beginnings of recordings may not be recorded correctly in
some cases.
≥When “Ext Link” is set to “Ext Link 2”, this function does not work if
the input signal is NTSC system. (
l 49)
Linked timer recordings with external
equipment (EXT LINK)
equipment (EXT LINK)
Yes
Cancel
DVD now recording this programme.
DVD
EB.book 29 ページ ２００４年４月１３日 火曜日 午前９時７分