Справочник Пользователя для Panasonic dmr-es10
- 6 -
•
When connecting to a television with the VIDEO OUT, S VIDEO OUT or COMPONENT VIDEO OUT terminal (
➔ page 3).
•
When connecting to a television that does not have the Q Link functin (
➔ page 42 of Operating Instructions).
This unit’s Auto-Setup function automatically tunes all available TV stations and synchronizes the time when the TV channel that is
broadcasting time and date information is tuned.
broadcasting time and date information is tuned.
•
When connecting to a television with RF socket only (
➔ page 4).
To stop partway
Press [RETURN].
■ If the clock setting menu appears
Set the clock manually (
➔ page 40 of Operating Instructions).
■ To confirm that stations have been tuned correctly (➔ page 38 of Operating Instructions)
■ To restart Auto-Setup (➔ page 39 of Operating Instructions)
■ To enter the satellite station’s name (➔ page 38 of Operating Instructions)
The name of the satellite station is not set automatically. (“-- -----” will appear under “Name” in the programme list). After Auto-Setup is
completed, enter the name manually.
completed, enter the name manually.
■ If you connect other equipment to AV2 terminal of this unit
Change the “AV2 Input” in the SETUP menu to match the connected equipment (
➔ page 36 of Operating Instructions).
Auto-Setup (Setup without Q Link functions)
SKIP
SLOW/SEARCH
REC MODE
REC
F Rec
TIME SLIP
FUNCTIONS
DIRECT NAVIGATOR
TOP MENU
RETURN
VOLUME
CH
STATUS
DISPLAY
SUB MENU
DIRECT TV REC
AV
VIDEO Plus+
CANCEL
MANUAL SKIP
INPUT SELECT
AUDIO
ERASE
EXT LINK
CREATE
CHAPTER
PROG/CHECK
TIMER
1
Turn on the television and select the appropriate AV
input to suit the connections to this unit.
input to suit the connections to this unit.
2
Press [
^ DVD] to turn the unit on.
Auto-Setup starts. This takes about 5 minutes.
3
When Auto-Setup has completed, the Owner ID settings screen appears.
Press [
q] and press the numbered buttons to enter a
4-digit PIN number.
•
Make a note of the PIN number (don’t forget), as it is not possible to return to the
factory preset.
factory preset.
4
Press [ENTER] twice to store the PIN number.
The cursor moves to “Name”.
5
Press [
q].
6
Press [
e, r] to select a letter and then press [q].
Repeat this to enter the name.
7
Press [ENTER] to store the name.
8
Press [
r] and [q], and then repeat step 6, 7 to enter
and store “House No.” and “Postcode”.
9
Press [RETURN].
The Owner ID settings screen disappears.
Auto-Setup
Ch
1
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN: to abort
RETURN
(When connecting to a television with RF socket only)
Set the new RF output channel to TV (refer to the
instructions for your TV). Select an unused channel
preset on your TV and tune it to the RF output
channel number shown on the unit’s display. (When
the Auto-Setup screen does not appear clearly even
after performing the above operations, re-tune the
channel until the Auto-Setup screen becomes clear.)
Set the new RF output channel to TV (refer to the
instructions for your TV). Select an unused channel
preset on your TV and tune it to the RF output
channel number shown on the unit’s display. (When
the Auto-Setup screen does not appear clearly even
after performing the above operations, re-tune the
channel until the Auto-Setup screen becomes clear.)
For the United Kingdom only
RETURN
Owner ID
RETURN : leave
PIN number
Name
House No.
Postcode
DMR-ES10-EB_QSG-1.fm 6 ページ ２００５年２月２８日 月曜日 午後１時１７分