Справочник Пользователя для Panasonic dvd-s325
RQTC0102
1
“AUDIO” tab
SETTING STATE
Display the current setting of the items below
DOWN SAMPLING
Check the digital
input limitations of the
equipment you connect
using COAXIAl terminal
and select the maximum
sampling frequency of
PCM digital output.
ON: When connected to equipment compatible with 44.1 or 48 kHz
OFF: When connected to equipment compatible with 88.2 or 96 kHz
Signals from copy-protected discs are converted to 48 or
44.1 kHz.
Some equipment cannot handle sampling frequencies
of 88.2 kHz, even if they can handle 96 kHz. Read your
equipment’s operating instructions for details.
•
•
•
DOLBY DIGITAL
With COAXIAl
connections (è
page 6)
BITSTREAM PCM
Select “
BITSTREAM” when
the equipment can decode the
bitstream (digital form of multi-
channel data). Otherwise,
select “
PCM” or “OFF”. (If
the bitstream is output to the
equipment without a decoder,
high levels of noise can be
output and may damage your
speakers and hearing.)
DTS
With COAXIAl
connections (è page 6)
BITSTREAM OFF
MPEG
]
5]6
With COAXIAl
connections (è page 6)
BITSTREAM PCM
DYNAMIC RANGE
ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest sound
level and the highest sound level. Convenient for late
night viewing. (Only works with Dolby Digital)
OFF
“DISPLAY” tab
SETTING STATE
Display the current setting of the items below
LANGUAGE
]
5
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH
ITALIANO SVENSKA NEDERLANDS POLSKI
]
6
ENGLISH FRANÇAIS ESPAÑOL DEUTSCH
ITALIANO ÐÓÑÑÊÈÉ NEDERLANDS PORTUGUÊS
]
7
ENGLISH 繁體中文
“OTHERS” tab
SETTING STATE
Display the current setting of the items below
REGISTRATION
Displays the unit’s
registration code.
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content. (è page 13, About DivX
VOD contents)
VOD contents)
n
n
n
JPEG TIME
To change the slideshow timing
1 SEC to 15 SEC (in 1 unit) 15 SEC to 60 SEC (in 5 unit)
60 SEC to 180 SEC (in 30 unit)
60 SEC to 180 SEC (in 30 unit)
“3 SEC” is the factory preset.
•
FL DIMMER
Changes the brightness
of the unit’s display.
BRIGHT DIM
AUTO: The display is dimmed, but brightness only when you
perform some operations.
AUTO POWER OFF
ON: The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
DEFAULTS
This returns all values in
the Setup menus to the
default settings.
RESET
The password screen is shown if “RATINGS” (è page 16) is
set. Please enter the same password with the numbered
buttons, then press [ENTER], then turn the unit off and on
again.
]
1
Language options
Continental Europe
FRENCH, SPANISH, GERMAN, ITALIAN, SWEDISH, DUTCH and POLISH
The Middle East and South Africa
FRENCH, SPANISH, GERMAN, ITALIAN, RUSSIAN, DUTCH and PORTUGUESE
Asia
CHINESE
]
2
The original language designed on the disc is selected.
]
3
Input a code number referring to the table (è page 19).
]
4
If the language selected for “AUDIO” is not available, subtitles appear in that
language (If available on the disc).
]
5
Continental Europe
]
6
The Middle East and South Africa
]
7
Asia
Changing the player settings