Справочник Пользователя для Panasonic KX-TD500
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
General Features
296
Features Guide
1.15
Proprietary Telephone Features
Background Music (BGM)
Description
Allows the PT user in on-hook status to listen to Background Music (BGM) from the built-in
speaker of his PT.
speaker of his PT.
Conditions
•
Hardware Requirements
A user-supplied external music source, such as a radio, is required to utilize this feature. Up
to two music sources can be connected to the system.
A user-supplied external music source, such as a radio, is required to utilize this feature. Up
to two music sources can be connected to the system.
•
Tenant Service
If "Tenant Service" is utilized, a music source for BGM is determined by System
Programming on a tenant basis.
If "Tenant Service" is utilized, a music source for BGM is determined by System
Programming on a tenant basis.
•
Turning on / off
This feature can be turned on / off by pressing "1" while the extension is on-hook. If it goes
off-hook, BGM is suspended temporarily.
This feature can be turned on / off by pressing "1" while the extension is on-hook. If it goes
off-hook, BGM is suspended temporarily.
•
Changing Music Source
Before changing the music source (MUS1 or MUS2) by software control, you must first
turn off the BGM at your extension; change the source; and then turn on the BGM again.
Before changing the music source (MUS1 or MUS2) by software control, you must first
turn off the BGM at your extension; change the source; and then turn on the BGM again.
•
Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
Installation Manual References
•
2.8.2 External Music Source
Programming Guide References
•
2.2 Tenant
– BGM Source
•
2.8 System Option
–
Special dial tone after setting feature
Features Guide References
•
•