Справочник Пользователя для Panasonic KX-TD208E

    Assigns the communication parameters of the RS-232C connection.

    <Operation>

    (1) Before assigning parameters, connect the KX-TD208 to COM 1 or
        2 of the PC using an RS-232C cable.

    (2) If you want to change parameters, use the TAB key, the cursor keys or
        the ENTER key to move the cursor.
        The default settings of the KX-TD208 are as follows:

           Baud Rate = 9600
           NL Code = CR+LF
           Parity = None
           Word Length = 8 bits
           Stop Bit = 1 bit
           Password = 1234

    (3) After editing the data, enter the password and press the ENTER key.

    (4) Saving starts and a message "Now saving system data" appears
        when the PC is connected to the KX-TD208.
        Connecting Status turns into "On-line(RS-232C)".
        When saving is completed, hit any key to go back to "Save Menu".

    <Condition>

    (1) If the password is wrong, an error message appears after pressing
        the ENTER key.
        Re-enter the correct one and press the ENTER key again.

    (2) An error message appears when something is wrong with the line.
        Check the line and then press the ENTER key again.
           Port No.      1 through 2
           Baud Rate     150, 300, 600, 1200, 2400, 4800, 9600
           NL Code       CR+LF or CR
           Word Length   7 or 8 bits
           Parity        None, Mark, Space, Even, Odd
           Stop Bit      1 bit or 2 bits
           Password      0 through 9     4, 5, 6 or 7 digits