Справочник Пользователя для Panasonic KX-TG2750S

The unit will let you know that someone has left voice mail for you in three ways; 
(a) VM indicator will flash on the base unit,
(b) “Voice mail” will be displayed on the cordless handset, and
(c) “

 

 

” will flash on the cordless handset. 

To listen to your voice mail message(s), follow the steps below.

• If “Store VM access#” is displayed and 3 beeps sound, store the number (p. 45).

• After listening to your message(s), “

 

 

” stops flashing but remains on the 

cordless handset display.

• If the base unit and cordless handset still indicate you have new messages even 

after you have listen to them, turn them off as follows.
—for the base unit: Press [FUNCTION/EDIT], then press and hold [CLEAR] until 

the unit beeps.

—for the cordless handset: Press [CONF/FUNCTION], then press and hold 

[HOLD/CLEAR] until the unit beeps.
“Voice mail” will disappear, “

 

 

” on the cordless handset stops flashing 

but remains and the VM indicator will turn off.

• If your voice mail service uses a voice mail tone and the recorded message is 

over 3 minutes long, the base unit and cordless handset may not indicate you 
have new messages.

• If your voice mail service uses a voice mail tone, the tone will be heard from any 

parallel connected phone. If you use another phone to retrieve messages, you 
have to dial your access number manually.

Press [VM].

• The base unit connects to the telephone line and dials the access number 

(p. 45).

• To switch from the speakerphone to the handset, lift it off the cradle.

Follow the pre-recorded instructions.

When finished, place the handset on the cradle or if using the 
speakerphone press [DIGITAL SP-PHONE].

Press the soft key (

), then press [

] or 

].

• The cordless handset connects to the telephone 

line and dials the access number (p. 45).

Follow the pre-recorded instructions.

When finished, press

 

[OFF].

   Voice mail