Справочник Пользователя для Panasonic lumix dmc-f1
13
Removing the USB connection cable safely
[For Windows]
If the USB connection cable is removed or the power switched off while the PC is working,
an error dialog box may appear. In such cases, click on [OK] to close the dialog box. To
remove the USB connection cable without the error dialog box being displayed, proceed as
follows.
If the USB connection cable is removed or the power switched off while the PC is working,
an error dialog box may appear. In such cases, click on [OK] to close the dialog box. To
remove the USB connection cable without the error dialog box being displayed, proceed as
follows.
1
Double click
icon on the task tray.
The Hardware removal dialog box appears.
2
Click on [USB Mass Storage Device], and
click on [Stop].
3
Confirm that the [USB Mass Storage
Device] is selected, click on [OK].
4
Click on [OK].
The USB connection cable can be safely removed.
≥
Depending on OS Windows 98SE, etc. the icon for safe
removal may not be displayed in the task tray. (There will
be no display depending on the set up of the OS) Make
sure that the card access indication of the digital camera
is off, then remove the cable. Please refer to the digital
camera operating instructions.
be no display depending on the set up of the OS) Make
sure that the card access indication of the digital camera
is off, then remove the cable. Please refer to the digital
camera operating instructions.
[For Macintosh]
1
Drop the [untitled] icon which appeared
when you connected the digital camera
with the USB connection cable into the
recycle bin, then disconnect the USB
connection cable.
with the USB connection cable into the
recycle bin, then disconnect the USB
connection cable.
1
2
3