Справочник Пользователя для Panasonic kx-tga549s
Useful Information
58
For assistance, please call 1-800-211-PANA (7262).
Making/answering calls, Intercom
Problem
Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
cuts in and out.
Interference from other
electrical units.
L
Move the handset and the base unit away from other
electrical appliances.
electrical appliances.
L
Move closer to the base unit.
L
Raise the base unit antennas.
L
Turn on the clarity booster feature (page 20).
L
If your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
The handset does not
ring.
ring.
L
The ringer volume is turned off. Adjust it (page 34).
I cannot make a call.
L
The dialing mode may be set incorrectly. Set the dial
mode (page 38) to match the type of telephone service
you have (tone or pulse).
mode (page 38) to match the type of telephone service
you have (tone or pulse).
L
If the base unit (including answering system) or the
other handset is in use, you may not be able to make a
call. Try again later.
other handset is in use, you may not be able to make a
call. Try again later.
L
While listening to messages using the handset, you
cannot make a call. Exit by pressing {OFF}.
cannot make a call. Exit by pressing {OFF}.
I cannot redial by
pressing {REDIAL}.
pressing {REDIAL}.
L
If the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
the number will not be redialed correctly.
L
If you press {REDIAL} after you have started dialing,
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
I cannot join an outside
call.
call.
L
You cannot join the call if the other handset is using
voice changer. To join the call, have that handset cancel
the voice changer.
voice changer. To join the call, have that handset cancel
the voice changer.
I tried to use voice
changer during a call, but
{
changer during a call, but
{
(VX)} is not shown on
the display.
L
You cannot use the voice changer when you are on a
conference call.
conference call.
I cannot have a
conversation using the
headset.
conversation using the
headset.
L
Make sure that an optional headset is connected
properly (page 55).
properly (page 55).
L
If “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
to switch to the headset.
I cannot make long
distance calls.
distance calls.
L
Make sure that you have long distance service.
I cannot page the
handset or base unit.
handset or base unit.
L
The called handset is too far from the base unit.
L
The called unit is in use. Try again later.
TG5438_5439.book Page 58 Friday, August 25, 2006 9:35 AM