Справочник Пользователя для Panasonic NV-GS80EB

Menu

LSQT1131

ª

This switches between date and time indications.
≥The movie camera automatically records the 

date and time of picture taking on the tape.

ª

Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 

(The original audio signals can be kept 
after the other audio signals are dubbed.) 

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 

Audio can be recorded in higher quality. 
(If audio signals are dubbed, then the 
original audio signals will be erased.) 

≥Audio dubbing cannot be performed on this unit. 

If you want to edit the sound on a model with an 
audio dubbing function, set [12bit] to take 
pictures.

ª

Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

ª

Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥

When the unit goes from quick start standby 
mode to recording pause

2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby 

mode 

2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs 
(

), and at other times. Check the sentence 

displayed on the screen. (

)

ª

[OFF]:

When about 5 minutes passed 
without any operation, the standby 
mode automatically will be set. In 
the standby mode, [

;] blinks and 

it takes time more than usual to 
start recording after you press the 
recording start/stop button.

[5 MINUTES]: When about 5 minutes passed 

without any operation, the movie 
camera automatically turns off to 
protect the tape or to prevent the 
battery from running down. When 
you use the movie camera, turn it 
on again.

≥In the following cases, the power may not turn 

off even when set [POWER SAVE] >> 
[5 MINUTES].

≥When connecting to the AC outlet

(When using the AC adapter)

≥When connecting the USB cable or the DV 

cable to a personal computer or other 
equipment

ª

If you want to edit the sound on a model with an 
audio dubbing function, set [12bit] to take 
pictures.
You can switch the sound (PCM Audio) when 
playing back a tape with sound recorded in 
[12bit].
[ST1]: It only plays back the original sound 

recorded.

[ST2]: It only plays back the sound on the tape 

added with audio dubbing.

[MIX]:

It simultaneously plays back both [ST1] 
and [ST2] sounds.

≥Audio dubbing cannot be performed on this unit. 

When playing back a tape recorded on this unit, 
you will not be able to hear the sound if [ST2] is 
set. Set [ST1].

ª

This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub 

sound) 

[L]:

Left channel sound (main sound) 

[R]:

Right channel sound (sub sound) 

LSQT1131_ENG.book  38 ページ  ２００７年１月１１日　木曜日　午前９時５分