Справочник Пользователя для Panasonic nv-hv61px
12
Recording from an external source
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
other recordings or video sources.
A new scene can be added to the end of previous one.
Preparations
• Connect a video movie camera or another VCR to this VCR
• Connect a video movie camera or another VCR to this VCR
as shown.
• Display the VCR picture on the TV.
• Insert the cassette on which the copying is to be performed,
• Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.
out.
• Select the audio/video source required by pressing
[INPUT SELECT]
(6) to set A1 or A2.
A1:
Through the AV1 (AUDIO IN/VIDEO IN) sockets.
A2:
Through the AV2 (AUDIO IN/VIDEO IN) sockets on
front panel.
front panel.
• Use the L and R connectors for operations in the normal
(monaural) mode.
Operations
1 Press [PLAY]
1 Press [PLAY]
(8) to start playback.
2 At the point where you want to join a new scene, press
[PAUSE/SLOW]
(29) to put it in the still playback
mode.
3 Press [REC]
(15) to put it in the recording pause mode.
4 Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
VCR.
5 When that point is reached, press [PAUSE/SLOW]
(29)
again to start recording the new picture and sound
from the playback unit.
from the playback unit.
6 To record (copy) additional scenes, press [PAUSE/
SLOW]
(29) to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
7 At the point where you want to stop recording, press
[STOP]
(12) to finish recording.
Note:
• If you leave the VCR in the recording pause mode for more
• If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to stop mode to protect the video heads.
switches over to stop mode to protect the video heads.
To Delete all of a Cassette’s
Contents (Tape Refresh Function)
Contents (Tape Refresh Function)
You can delete a cassette contents (the picture, the sound
and the Jet Navigator data) all at once.
and the Jet Navigator data) all at once.
Operations
1 Be sure to set [JET NAVIGATOR] to [ON] when you
1 Be sure to set [JET NAVIGATOR] to [ON] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [OFF] or is
recorded on another VCR. (See page 8.)
recorded while setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you
want to delete all contents of a cassette that is
recorded while setting [JET NAVIGATOR] to [OFF] or is
recorded on another VCR. (See page 8.)
2 Insert a cassette that you want to delete the cassette
contents.
3 Press [MENU]
(9) to display the Main menu on the
screen.
4 Press [
43] (28) to select the
[TAPE REFRESH], and then press
the [ENTER]
the [ENTER]
(26).
5 Press [ENTER]
(26) for 2 seconds or more to start the
tape refresh function.
The tape is rewound to the beginning, and it is fast-forwarded
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
Note:
• When a video cassette with a broken off erasure prevention
• When a video cassette with a broken off erasure prevention
tab is inserted, this function is not activated.
TIMER REC
/ I
REC/OTR
VIDEO
IN (AV1)
OUT
L
AUDIO
R
(2)
(1)
(3)
(1) AV 1
(VIDEO IN
(43)/AUDIO IN (46))
(2) AV 2
(VIDEO IN
(36)/AUDIO IN (37))
(3) Other VCR or Video movie
camera
Recording VCR
TIMER REC
/ I
REC/OTR
(1)
¢
(1) Other VCR or Video movie
camera
¢ Audio Cable (Not supplied)
T A P E R E F R E S H
S T A R T :
E N T E R
E N D : S T O P
T A P E R E F R E S H
E N D : S T O P
NV-HV61PX.book 12 ページ ２００４年３月４日 木曜日 午前９時１０分