Справочник Пользователя для Panasonic nv-mx500
Others
-51-
automatically to protect the tape or a Card and to save the
Battery power. (
Battery power. (
-15-
,
-31-
)
3: The Movie Camera power does not stay on long
enough.
• Is the Battery low? Charge the Battery or attach a fully
charged Battery. (
-8-
)
• Has condensation occurred? Wait until the Condensation
Indication disappears. (
-49-
)
Battery
1: Battery runs down quickly.
• Is the Battery fully charged? Charge it with the AC
1: Battery runs down quickly.
• Is the Battery fully charged? Charge it with the AC
Adaptor. (
-8-
)
• Are you using the Battery in an extremely cold place? In
cold places, the operating time of the Battery becomes
shorter. (
shorter. (
-49-
)
• Has the Battery worn out? If the operating time is still too
short even after the Battery is fully charged, the Battery
has worn out.
has worn out.
2: The Battery cannot be charged.
• If the DC Input Lead is connected to the AC Adaptor,
• If the DC Input Lead is connected to the AC Adaptor,
charging cannot be performed. Disconnect the DC Input
Lead.
Lead.
Normal Recording
1: Recording does not start although power is supplied
1: Recording does not start although power is supplied
to the Movie Camera and the Cassette is correctly
inserted.
inserted.
• Is the accidental erasure prevention slider on the Cassette
open? If it is open (set to [SAVE]), recording cannot be
performed. (
performed. (
-9-
)
• Is the tape wound to the end? Insert a new Cassette. (
-9-
)
• Is the Movie Camera power turned on? (
-15-
)
• Is the [CAMERA] Lamp on? If the [CAMERA] Lamp is not
on, no recording function can be operated. (
-15-
)
• Has condensation occurred? Wait until the Condensation
Indication disappears. (
-49-
)
Other Recording
1: Auto Focus Function does not work.
• Is Manual Focus Mode selected? If Auto Focus Mode is
1: Auto Focus Function does not work.
• Is Manual Focus Mode selected? If Auto Focus Mode is
selected, focus is automatically adjusted. (
-21-
)
• There are some recording subjects and recording
surroundings for which the Auto Focus Function does not
operate correctly. In this case, use the Manual Focus
Mode to adjust the focus. (
operate correctly. In this case, use the Manual Focus
Mode to adjust the focus. (
-52-
)
Editing
1: Audio dubbing cannot be performed.
• Is the accidental erasure prevention slider on the Cassette
1: Audio dubbing cannot be performed.
• Is the accidental erasure prevention slider on the Cassette
open? If it is open (set to [SAVE]), recording cannot be
performed. (
performed. (
-9-
)
• Are you attempting to edit a tape portion that was recorded
in LP Mode? LP Mode does not allow audio dubbing to
operate. (
operate. (
-14-
)
Indications
1: The Time Code becomes inaccurate.
0 The Time Code Indication counter may not be constant in
1: The Time Code becomes inaccurate.
0 The Time Code Indication counter may not be constant in
the reverse direction in Slow Motion Playback Mode, but
this is not a malfunction.
this is not a malfunction.
2: The Remaining Tape Time Indication disappears.
• When you record still pictures in Photoshot Mode, the
• When you record still pictures in Photoshot Mode, the
Remaining Tape Time Indication may disappear
temporarily. However, it reappears when recording
normally.
temporarily. However, it reappears when recording
normally.
3: The Remaining Tape Time Indication does not match
the actual remaining tape time.
• If scenes of less than 15 seconds are continuously
recorded, the remaining tape time cannot be displayed
correctly.
correctly.
• In some cases, the Remaining Tape Time Indication may
show remaining tape time that is 2 to 3 minutes shorter
than the actual remaining tape time.
than the actual remaining tape time.
Playback (Pictures)
1: Pictures cannot be played back even when the [
1: Pictures cannot be played back even when the [
1]
Button is pressed.
0 Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the
playback function cannot be used. (
-25-
)
2: Mosaic-pattern noise appears on images during Cue,
Review or Slow Motion Playback.
• This phenomenon is characteristic of digital video
systems. It is not a malfunction.
3: Although the Movie Camera is correctly connected to
a TV, playback images cannot be seen.
• Have you selected “Video Input” on the TV? Please read
the operating instructions of your TV and select the
channel that matches the input sockets used for the
connection.
channel that matches the input sockets used for the
connection.
4: Playback picture is not clear.
• Are the heads of the Movie Camera dirty? If the heads are
• Are the heads of the Movie Camera dirty? If the heads are
dirty, playback image cannot be clear. (
-49-
)
Playback (Sound)
1: Sound is not played back from the built-in speaker of
1: Sound is not played back from the built-in speaker of
the Movie Camera or the headphones.
0 Is the volume too low? During playback, keep pressing the
[PUSH] Dial until the [VOLUME] Indication appears. Then,
turn the [PUSH] Dial to adjust the volume. (
turn the [PUSH] Dial to adjust the volume. (
-25-
)
2: Different sounds are reproduced at the same time.
• [12bit AUDIO] on the [PLAYBACK FUNCTIONS]
• [12bit AUDIO] on the [PLAYBACK FUNCTIONS]
Sub-Menu of the [VCR FUNCTIONS] Main-Menu has
been set to [MIX]. As a result, the original sound and
sound that was recorded by audio dubbing are played
back together. It is possible to reproduce the sounds
separately. (
been set to [MIX]. As a result, the original sound and
sound that was recorded by audio dubbing are played
back together. It is possible to reproduce the sounds
separately. (
-29-
)
3: The original sound was erased when audio dubbing
was performed.
• If you perform audio dubbing on a recording done in [16bit]
Mode, the original sound will be erased. If you wish to
preserve the original sound, be sure to select [12bit] Mode
at the time of recording.
preserve the original sound, be sure to select [12bit] Mode
at the time of recording.
4: Sounds cannot be played back.
• Although a Cassette with no audio dubbing is being
• Although a Cassette with no audio dubbing is being
played, is [12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]? To play back
a Cassette with no audio dubbing, [12bit AUDIO] must be
set to [ST1]. (
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]? To play back
a Cassette with no audio dubbing, [12bit AUDIO] must be
set to [ST1]. (
-29-
)
• Is the Variable Speed Search Function working? Press the
[
1] Button to cancel the Variable Speed Search Function.
(
-25-
)
Card
1: Recorded pictures are not clear.
0 Is [PICTURE QUALITY] on the [CARD SETUP] Sub-Menu
1: Recorded pictures are not clear.
0 Is [PICTURE QUALITY] on the [CARD SETUP] Sub-Menu
set to [NORMAL] or [ECONOMY]? If recording is done
with it set to [NORMAL] or [ECONOMY], images with fine
details may include a mosaic-like pattern. Set
[PICTURE QUALITY] to [FINE]. (
with it set to [NORMAL] or [ECONOMY], images with fine
details may include a mosaic-like pattern. Set
[PICTURE QUALITY] to [FINE]. (
-32-
)
2: Card Photoshot Playback images do not look normal.
• The picture may be damaged. In order to prevent the loss
• The picture may be damaged. In order to prevent the loss
of image data, backing up on a Cassette or a personal
computer is recommended. (
computer is recommended. (
-34-
,
-39-
)
3: During Playback the [
k] Indication is displayed.
• The image was either recorded in a different format, or
data is damaged.
4: Even if a Card is formatted, it cannot be used.
• Either the Movie Camera or the Card may be damaged.
• Either the Movie Camera or the Card may be damaged.
Please consult a dealer.
B5-B.book 51 ページ 2002年8月6日 火曜日 午前11時33分