Справочник Пользователя для Panasonic PT-LB10VU

Flashing (red)

It is nearly time to
replace the lamp
unit.

Illuminated (red)

An abnormality has been detected in the lamp
circuit.

B Does “REPLACE

LAMP” appear on
the screen after
the projector is
turned on?

B This occurs when

the operation time
for the lamp unit is
nearing 1 800
hours (when
“LAMP POWER”
has been set to
“HIGH”). Ask your
dealer or an
Authorized
Service Center to
replace the lamp
unit.

B The power may

have been turned
on straight away
after it was turned
off.

B Wait for a while

until the lamp unit
cools down before
turning the power
back on again.

B There may be an

abnormality in the
lamp circuit.

B Disconnect the

power cord by
following the
procedure on
page 26, and then
contact an
Authorized
Service Center.

NOTE:
B Be sure to disconnect the power cord by following the procedure given

in “Turning off the power” on page 26 before carrying out any of the
procedures in the “Remedy” column.

B If the power turns off after the TEMP indicator has illuminated, it means

an abnormality has occurred. Please contact an Authorized Service
Center so that the necessary repairs can be made.