Справочник Пользователя для Panasonic sc-ht600

K

CMY

CY

MY

CM

Y

M

C

21new.eps 175 lpi  45˚

                    black 

Tune out a radio (     

 

see Manual tuning at left side).

If another radio is preset to a certain channel, the existing 
radio will be erased.

Manually tune the radio programs by selecting radio frequency. In 
addition, you can also select preset channels so as to tune the 
radio programs conveniently. 

If the receiving effect is worse, this mode may improve sound 

quality, but the radio program is only monophony.

Press [FM  MODE] again to cancel the mode.

The mode is canceled when frequency is changed.

Close monoophony to enjoy an ordinary effect.

The stereo and monophony radio programs will be automatically 

played as per the relevant receiving mode.

Any AM radio programs of the appointed frequency will be 
changed by the procedures. Hence, these radio stations should 
be appointed again.

The preset channels can be simply selected.
You can preset up to 15 radio stations into the FM and AM bands.

The appointing operation is a failure. Please manually preset 
the programs.

Or 
Press [SELECTOR] on the main unit to select  FM  or  AM .

Select 2-digit number:
e.g.  when you select

 12, press [   10] 

  [1] 

  [2]

Or
Press [TUNE MODE] on the main unit, and select  PRESET .

    

Press [TUNE MODE] on the front panel of the main unit

     and select  MANUAL .
      Each time you press the key, display will vary in turn:
      
                        MANUAL                           PRESET 

     

    desired radio station.
    

TUNED :Appears when a radio station is tuned.

     ST  :      Appears when a stereo FM radio 
                  program is tuned.
     Keep on pressing [   TUNING   ] till frequency begins to change 
     quickly.
     The unit will start auto tuning, and tuning will be stopped 
     automatically when tuned to a certain  radio station.

        

To cancel automatic tuning, Press [    TUNING    ] again.  

  

    

Tune to  FM87.50MHZ   (     see Manual tuning at left 
 side)

 

When frequency starts to change, loosen this button.

 When setting a radio channel,  PGM  will blink;  then the 
 program on the set radio channel is played.

 

 frequency .(      see Manual tuning at left side)

 

When frequency starts to change, loosen this button.

 When setting a radio channel,  PGM  will blink; then the
 program on the set radio channel is played.

RQTC0019

Before leaving  the factory, the unit is preset to be 9 kHz, 
but it can be changed to receive the radio programs that 
are distributed within the step of 10kHz.

 
     Press [SELECTOR] on the main unit to select FM.
     Keep on pressing  [SELECTOR].
When  AM  is displayed several seconds later, current minimum 
frequency will flicker on the display. Continue to press the button, 
the minimum frequency will vary while the step will also vary.
To return to original step, just repeat the above procedures.

(only for Asia)