Справочник Пользователя для Panasonic WV-BM500

-5-

1. Set the Power On/Off Switch (1) to the ON (;)

position. 

2. Adjust the Bright Control (7) and Contrast Control

(9).

3. Adjust the Horizontal Hold

(3) until the picture is sta-

bilized, if the picture slips

to either side, or appears

as a series of horizontal

stripes.

4. Adjust the Vertical Hold

(5), if the picture rolls up

or down.

BRIGHT

CONTRAST

H.HOLD

V.HOLD

increase

increase

5. Height (4)

This recessed screwdriver control should be

adjusted simultaneously to give proper vertical

height consistent with good vertical linearity.

Adjustment should be made to extend the picture

limits approximately 1/10” beyond the top and bot-

tom edges of the mask at over scanning operation.

6. Vertical Linearity (6)

This recessed screwdriver control should be

adjusted to give proper vertical linearity.

7. Focus (8)

The clearest picture is produced when this screw-

driver control is adjusted.

8. DC Restoration (10)

DC restoration circuit provides a stable reference

for the black level. Set the switch to ON position to

prevent excessive contrast and preserve shadow

detail.