Справочник Пользователя для Panasonic wj-fs216

-10-

1. Move the cursor to SETUP in TITLE SETUP.

The context of MENU 2 OF 3 will not change if the
SYSTEM MODE parameter in MENU 3 OF 3 is
changed.
An example is shown below.

A title consisting of up to 8 alphanumeric characters
can be displayed on the monitor.

2. Press button 15 (SET). The TITLE menu appears on

the monitor.

3. Move the cursor to the channel number whose title

is to be edited by pressing buttons 9-12 (

D

D

, 

C

C

, 

A

A

,

B

B

).

4. Select the first character for the title by pressing

button 13 (

−

) or 14 (+).

Characters for the title can be selected from the fol-
lowing list:

5. After selecting the first character, press button 12

(

B

B

). Then select the second character.

6. Repeat steps 3 to 5 above to complete the title.
7. Repeat steps 3 to 6 to edit the other channels.
8. Press button 15 (SET) to finalize the character

selection.  The title is set, and the display returns to
MENU 2 OF 3.

1. Select a character to be erased.
2. Select “•” (space mark) to erase the character.

1. Move the cursor to the channel number whose title

is to be erased.

2. Press buttons 13 (

−

) and 14 (+) simultaneously.

You can select the position on the monitor where
you want the title to be displayed.

1. Move the cursor to POSITION in TITLE POSITION.

←→

(space mark)

2. Press button 15 (SET). The TITLE POSITION setting

is on stand by.

3. Select the position where the title is to be displayed

by pressing button 11 (

A

A

) or 12(

B

B

).  You can

select any of the 7 positions shown in the diagram
above.

4. Press button 15 (SET) to finalize the title position.

The title position is set, and the display returns to
MENU 2 OF 3.

All channel titles will be displayed in the same
position.
You cannot specify a different position for each
title.