Справочник Пользователя для Panasonic wj-sx650p

64

■ Tour Sequence

● WV-CU950/650

1. Enter the desired sequence number by pressing the

numeric buttons. The entered number will appear on
the LCD.

2. Press the TOUR SEQ button. The tour sequence will be

activated.

● WV-CU360C/CJ

1. Enter the desired sequence number by pressing the

numeric buttons. The entered number will appear on
the LED display.

2. Press the TOUR SEQ button. The tour sequence will be

activated.

■ Group Sequence/Preset

● WV-CU950/650

1. Select a monitor assigned for desired group

sequence/preset. (Refer to p. 57 Monitor Selection.)

2. Enter the desired sequence number by pressing the

numeric buttons. The entered number will appear on
the LCD.

3. Press the GROUP SEQ button while holding down the

SHIFT button. The group sequence will be activated.

● WV-CU360C/CJ

1. Select a monitor assigned for desired group

sequence/preset. (Refer to p. 57 Monitor Selection.)

2. Enter the desired sequence number by pressing the

numeric buttons. The entered number will appear on
the LED display.

3. Press the GROUP SEQ button. The group sequence will

be activated.

● Notes:

• If you have specified Group Sequence 9 to 32 in Step

2, group preset will be activated. The system status will
be the same as that after camera selection.

• Group sequence/preset will not be activated for moni-

tors selected by operators with higher priority or
restricted by the monitor access setting 

• When one of the monitors assigned for the active group

sequence is controlled by a higher-priority operator,
you cannot control the monitors. (Monitor busy)