Справочник Пользователя для Panasonic WV-CP160

If ELC is selected, set MASK SET according to this procedure.

1. Move the cursor to the SUPER-D2

parameter and select OFF. (When you
select ELC, SUPER-D2 is not avail-
able.) The item MASK SET appears on
the menu.

2. Move the cursor to MASK SET and

press 

. 48 mask areas appear on

the monitor screen. The cursor is blink-
ing in the upper left corner of the
screen.

3. Move the cursor to the area where

backlight is bright and press 

to

mask that area. The mask turns to
white. (When the cursor is moved on
an area that has already been masked,
the mask and cursor start blinking.)

4. Repeat step 3 to mask the desired

area. To cancel masking, move the
cursor to that area and press 

.

5. After masking is completed, press 

for 2 seconds or more. The ALC CONT
menu appears.

6. If you want to change the video output

level (picture contrast), move the “I”
cursor for LEVEL and adjust the level.

If ON is selected for the SUPER-D2 parameter, a shadow (black line) may appear at

the boundary between the bright and the dim scene. This is a natural phenomenon and
does not indicate trouble.

Move the cursor to the SHUTTER parame-
ter and select the electronic shutter speed.
The preset values for SHUTTER change by
pressing or as 

shown 

right.

When ELC is selected for ALC/ELC or ON is selected for SUPER-D2, this item is not

available.

You can set the gain (brightness level por-
tion of an image) to automatic level adjust-
ment (ON) or fixed level (OFF).
Move the cursor to the AGC parameter and
select automatic level adjustment (ON) or
fixed level (OFF).

If ON is selected for the AGC para-

meter, the noise reduction function is
automatically activated under low light
conditions to reduce noise. In pictures containing a moving object, this may result in an
afterimage.

There are two modes for SENS UP.

If you select X10 AUTO, for

example, the sensitivity is raised
automatically to X10 max. When
AUTO is selected, AGC is auto-
matically set to ON.

If you select X32 FIX, for example,

the sensitivity is raised to just X32.

Move the cursor to the SENS UP parameter and select the parameter for electronic sensitivi-
ty enhancement.
The preset values for SENS UP (electronic sensitivity enhancement) change by pressing

or 

as shown at right:

• When OFF is selected for

SUPER-D2 on the CAM SET UP
menu.

• When ON is selected for

SUPER-D2 on the CAM SET UP
menu.

• When ON is selected for SUPER-D2 in the ALC CONT menu, FIX is not available for this

item.

• When you select AUTO for SENS UP and ON for SUPER-D2, the SENS UP function has

priority so that the SUPER-D2 function is not activated automatically.

• While the SENS UP function is selected, noise, spots or a whitish phenomenon may

appear in the picture when the sensitivity of the camera is increased. This is a normal
phenomenon.

X2 AUTO

OFF

X4 AUTO

X6 AUTO

X10 AUTO

X32 FIX

X10 FIX

X6 FIX

X4 FIX

X2 FIX

OFF

X16 FIX

↵

Blinking

Blinking

Blinking

Turns to white

↵

↵

↵

↵

↵

↵

OFF

X2AUTO

X10AUTO

X6AUTO

X4AUTO

OFF (1/50)

1/120

1/10000

1/4000

1/2000

1/1000

1/250

1/500