Справочник Пользователя для Gateway 7210
Video problems
117
The video is distorted
The display setup is
incorrect
incorrect
In the Control Panel window (Start | Settings |
Control Panel), double-click Display and
check the settings. The correct video type
should be selected, along with a supported
resolution. Check your monitor and video
controller documentation for details.
Control Panel), double-click Display and
check the settings. The correct video type
should be selected, along with a supported
resolution. Check your monitor and video
controller documentation for details.
The video card has failed
Try another video card.
Probable cause
Solution
The monitor controls are
not properly adjusted
not properly adjusted
Adjust the monitor controls until the text
becomes clear. (See your monitor
documentation for more information.)
becomes clear. (See your monitor
documentation for more information.)
The connector or cable is
damaged
damaged
Check the connector and cable for bent or
damaged pins.
damaged pins.
The surge protector or
UPS is damaged
UPS is damaged
Disconnect the monitor power cable, then
connect it directly to the power source.
connect it directly to the power source.
The monitor is too close
to a source of electrical
interference
to a source of electrical
interference
Move the monitor away from sources of
electrical interference, such as televisions,
unshielded speakers, microwave ovens,
fluorescent lights, and metal beams or
shelves.
electrical interference, such as televisions,
unshielded speakers, microwave ovens,
fluorescent lights, and metal beams or
shelves.
The monitor needs to be
degaussed
degaussed
Turn off the computer and monitor and leave
them off for at least a half hour, then restart the
system.
them off for at least a half hour, then restart the
system.
Probable cause
Solution
8505945.book Page 117 Thursday, March 9, 2000 2:13 PM