Справочник Пользователя для JVC DD-1
42
Pla
y
ing bac
k
sou
rce
s fro
m
ot
he
r
d
evic
e
s
1
Press [LINE].
• Each time you press [LINE], the display
changes in the display window as follows.
- “LINE 1” for selecting the device con-
- “LINE 1” for selecting the device con-
nected to the [LINE IN 1] terminal
- “LINE 2” for selecting the device con-
nected to the [LINE IN 2] terminals
- “LINE-DIGITAL” for selecting the digital
audio device connected to the [LINE-DIGI-
TAL IN] terminal
TAL IN] terminal
• You can also select the connected device as
the source by repeatedly pressing
[SOURCE] on the main unit.
[SOURCE] on the main unit.
2
Start playback on the connected
device.
device.
• Refer also to the operation manual for the
connected device.
3
Adjust the volume and make other
necessary settings.
necessary settings.
• Refer to “Basic operations” on page 17.
You can select the gain of the signal from the
[LINE IN 1] and [LINE IN 2] terminals.
Use the initial settings for normal operation. If the
sound is too small or too loud, change the settings.
[LINE IN 1] and [LINE IN 2] terminals.
Use the initial settings for normal operation. If the
sound is too small or too loud, change the settings.
1
Press [LINE] repeatedly to select
“LINE 1” or “LINE 2” in the display
window.
“LINE 1” or “LINE 2” in the display
window.
2
Hold down [ENTER].
• Each time you hold down [ENTER], the dis-
play changes as follows.
“LEVEL 1” : the initial setting for “LINE 2”
“LEVEL 2”
“LEVEL 3” : the initial setting for “LINE 1”
• The signal gain increases in the order of
“LEVEL 1”, “LEVEL 2” and “LEVEL 3”.
NOTE
• You can select the signal gain respectively for
• You can select the signal gain respectively for
“LINE 1” and “LINE 2”.
Selecting other devices as the
source
source
Selecting the signal gain
Playing back sources from other devices
DD-831[A_Ux].book Page 42 Wednesday, August 30, 2006 11:48 AM