Справочник Пользователя для JVC GR-D20

EN

To obtain correct focus.

If you are using the viewfinder, you should already

have made the necessary viewfinder adjustments
(

墌

 pg. 8).

Set the Power Switch 

y

 to “

” while pressing

down the Lock Button 

t

 located on the switch, then

press FOCUS 

&

 (

墌

 pgs. 40 and 41). The manual

focus indicator appears.

To focus on a farther subject, rotate the MENU/

VOLUME wheel 

$

 towards “+”. “

” 

q

 appears and

blinks.
To focus on a nearer subject, rotate the MENU/
VOLUME wheel 

$

 towards “–”. “

” 

q

 appears and

blinks.

Press the MENU/VOLUME wheel 

$

 in. Focus

adjustment is complete.

To reset to Auto Focus, press FOCUS 

&

 twice or set

the Power Switch 

y

 to “

”.

If FOCUS 

&

 is pressed once, the camcorder will enter

the focus adjustment mode again.

● Be sure to focus the lens in the maximum telephoto

position when you use the Manual Focus mode. If you
focus in on a subject in the wide-angle position, sharply
focused images cannot be obtained when zoomed up
because the depth-of-field is reduced at longer focal
lengths.

● When the focus level cannot be adjusted any further or

closer, “

” or “

”  will blink.

Manual exposure adjustment is recommended in the
following situations:

• When shooting using reverse lighting or when the

background is too bright.

• When shooting on a reflective natural background

such as at the beach or when skiing.

• When the background is overly dark or the subject

light.

Set the Power Switch 

y

 to “

” while pressing

down the Lock Button 

t

 located on the switch. Open

the LCD monitor fully or pull out the viewfinder fully.

Press the MENU/VOLUME wheel 

$

 in. The Menu

Screen appears.

Rotate the MENU/VOLUME wheel 

$

 to select

“

 (EXPOSURE)”, then press it.

Rotate the MENU/VOLUME wheel 

$

 to select

“MANUAL”, then press it. The Menu Screen disappears.
The exposure control indicator appears.

Rotate the MENU/VOLUME wheel 

$

 towards “+” to

brighten the image, or towards “–” to darken the image.
(maximum ±6)

Press the MENU/VOLUME wheel 

$

 in. Exposure

adjustment is complete.

..... select “AUTO” in step 4. Or, set the Power Switch

y

 to “

”.

..... press BACKLIGHT 

0

. 

 

4

 is displayed and the

subject is brightened. If pressed again, 

 

4

disappears and the brightness returns to the
previous level.

• +3 exposure has the same effect as the BACKLIGHT

Button 

0

.

• Using BACKLIGHT 

0

 may cause the light around the

subject to become too bright and the subject to
become white.

• Backlight compensations is also available when the

Power Switch 

y

 is set to “

”.

You cannot use the manual exposure control at the same
time with backlight, spotlight (

墌

 pg. 16) compensation and

“SNOW” (

墌

 pg. 16).

  01 D50/40/30/20EK 16-27

02.12.4, 19:11

19