Инструкции По Обслуживанию для kymco mo p250

Remove the seat and met-in box. (!2-6)

Disconnect the A.C. generator connector.

Measure the exciter coil resistance between

the black/white wire terminal and ground.

Black/white_

Ground

8.1MW

Electric tester: YF-3501

For A.C. generator removal/installation, refer

to pages 10-3 and 10-6.

Disconnect the pulser coil wire coupler.

Measure the pulser coil resistance between

the blue/white and green/white wire terminals.

Blue/Yellow_

Green/Whit

e

105_

110

W

Electric tester: YF-3501

Measure the resistance between the terminals.

Replace the CDI unit if the readings are not

within the specifications in the table below.

This test is performed with the stator

installed in the engine.

＊

Measure the resistance in the XW range.

＊

Pulser Coil Wire Coupler