Справочник Пользователя для JVC KS-FX210
8
ENGLISH
KS-FX210 [EN] GET0052-001A [J]
Manual preset
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
FM2, FM3 and AM) manually.
Ex: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
want to store stations into (in this
example, FM1).
Each time you press the button, the FM
band changes as follows:
band changes as follows:
2
Tune into a station of 88.3 MHz.
3
Press and hold the number button
(in this example, 1) for more than
2 seconds.
(in this example, 1) for more than
2 seconds.
Preset number “P1” flashes for a while
4
Repeat the above procedure to store
other stations into other preset
numbers.
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new station
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
battery replacement). If this occurs, preset the stations
again.
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 7.
Remember that you must store stations first. If you
have not stored them yet, see “Storing stations in
memory” on page 7.
1
Select the band (FM1 – 3, AM).
2
Select the number (1 – 6) for the
preset station you want.
preset station you want.
To tune into stations
of higher frequencies.
of higher frequencies.
To tune into stations
of lower frequencies.
of lower frequencies.
FM1
FM2
FM3
A M
F M
AM
ST
BEAT POP SOFT
LOUD
FM1
FM2
FM3
F M
ST
BEAT POP SOFT
LOUD
EN06-08-KS-FX210[J]f
10/8/01, 10:14 AM
8