Справочник Пользователя для JVC xv-s403sg

*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the 

component you are going to connect.

You can enjoy using the unit by simply connecting it to a TV.  To improve audio sound quality, connect the audio outputs 
to your separate audio equipment. (See the following pages.)

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables. 

• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo 

audio output to monaural.

• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable 

(optional) in addition to the (standard) video connection to get better picture quality.

For your TV connection, you can use either the S-video output or the component video output.
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the 
rear panel to “S-VIDEO AND VIDEO”. ( For XV-S402SL/XV-S403SG, the VIDEO jack is enabled regardless of this switch 
position.) Then, “S-VIDEO” appears on the display window for a few seconds.

Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD 
removed. Otherwise, the changed setting is not effective. 

Yellow

Audio/Video cable
     (supplied)

White

Red

S-video cable
(not supplied)

The unit

Yellow

White

Red

For XV-S402SL/XV-S403SG
If the TV has an AV COMPU LINK terminal, 
you can use the AV COMPU LINK function.  
See “AV COMPU LINK remote control 
system” on page 52 for details.

TV

: For XV-S402SL/XV-S403SG

(Display Window)

' !"#$%&