Справочник Пользователя для Toshiba d-r4su

How to initialize a disc
To initialize a DVD-RAM disc, load it in the recorder.
See 

 page 20 for loading a disc.

The following menu appears. (The actual contents
depends on the operational status of the recorder.)

e.g.

press SELECT/ENTER.
A sub menu appears on the right side.

e.g.

e.g.

Numbering a disc
The recorder automatically numbers discs when
initializing. However, you can assign a desired number
(using 3 digits) and designate sides A and B on a double-
sided disc. (DVD-RW discs cannot be numbered.)
(1) Press   /   buttons to select “Edit” of “Disc Number”

then press SELECT/ENTER button.

(2) Press   /   buttons to select a digit.
(3) Press   /   buttons to shift.
(4) Repeat steps (2) and (3).
(5) Press SELECT/ENTER button.

Naming a disc
You can name a disc.
(1) Press   /   buttons to select “Edit” of “Disc Name,”

then press SELECT/ENTER button.
The character input window appears.

(2) Enter a disc name following the procedure of

“Entering characters” (

 page 30).

(3) Press 

 button to eliminate the window.

A disc should be initialized in the following cases: (The
recorder may display a message to request you to do
so.)

e.g.

When you use a DVD-RAM/RW disc on this recorder
for the first time.
If data fragments produced by repeated recording or
erasing have accumulated.
If a disc error has occurred.
When you want to record on a DVD-RAM disc for PC.
(

 page 8)

Initializing formats a disc logically and insures that it will
perform to its full capability. However, this erases all data
on the disc, so make sure that it does not matter if data
on the disc is erased whenever you initialize a disc.

D-R4SU_Ope(US)p025-037

05.3.4, 3:05 PM

28