Справочник Пользователя для Toshiba IK-HR2D

13

䞉㻌

Connect a USB terminal of the camera and a USB terminal of the computer with a USB cable.

䞉㻌

Turn on the power of both the camera and the computer.

䞉㻌

Run the viewer software.

*  Please use a cable supporting mini-USB (B type) for the USB terminal of the camera.
*  To display video captured by the camera, viewer software supporting USB Video Class is required 

separately.

*  In case of Windows

®

 XP SP2 or SP3, the built-in viewer software can be used.

The procedure for using the viewer software is described below:
䞉㻌

Click Start Menu 䊻 My Computer

䞉㻌

Double click USB Video Device icon, and the video will be displayed.

The following can be controlled by USB from a computer. Some viewer software may not support this 
function.
Resolution䠖
䚷䚷䐟

1920×1080䚷YUY2䚷Approximately 5fps

䚷䚷䐠

1280×720䚷YUY2䚷Approximately 10fps

Exposure time䠖
䚷䚷

AUTO ON䠖The electronic shutter is set to AUTO mode.

AUTO OFF䠖The electronic shutter is set to MANUAL mode.

                         In Manual mode the exposure time can be set between OFF to 1/4000s.
White balance䠖
䚷䚷

AUTO ON䠖The White balance is set to ATW mode.

AUTO OFF䠖The White balance is set to AWB mode.

                         The color temperature can be set to 3200K or 5600K in the AWB mode.

Note: 
࣭When displaying video with USB, resolution is changed to the one specified by the computer 

࣭When the resolution is set by the computer (viewer), the DVI output mode appears in the upper 

Note that the displayed mode is not a USB output mode.
࣭When the computer (viewer) sets resolution to 1920 × 1080 while you are using the camera in the 

࣭The exposure time and white balance set during video display with USB will be stored.