Справочник Пользователя для Toshiba L350D
User’s Manual
4-23
L350/L350D
■
Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit
encryption algorithm (Atheros module type).
encryption algorithm (Atheros module type).
■
11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b,
802.11g and 802.11n respectively. The IEEE 802.11n specification has
not been finalized and is currently in draft release. The TOSHIBA
11a/b/g/n Wireless LAN Adaptors are based on the draft release version
2.0, of the IEEE 802.11n specification. An adaptor with 11a/b, 11a/b/g or
11a/b/g/n can communicate on any of its supported formats; the actual
connection will be based on the access point to which it connects.
802.11g and 802.11n respectively. The IEEE 802.11n specification has
not been finalized and is currently in draft release. The TOSHIBA
11a/b/g/n Wireless LAN Adaptors are based on the draft release version
2.0, of the IEEE 802.11n specification. An adaptor with 11a/b, 11a/b/g or
11a/b/g/n can communicate on any of its supported formats; the actual
connection will be based on the access point to which it connects.
■
Connection compatibility with the wireless equipment in draft 11n mode
is not guaranteed.
is not guaranteed.
■
The draft 11n function cannot be used with WEP/TKIP. Draft 11n mode
can be used only with WPA-PSK(AES) mode or no security mode.
can be used only with WPA-PSK(AES) mode or no security mode.
Security
■
Be sure to enable encryption function. Otherwise your computer will
allow the illegal access by outsider through wireless LAN to cause
illegal instruction, eavesdropping, and loss or destruction of stored data.
TOSHIBA strongly recommends the customer to enable the encryption
function.
allow the illegal access by outsider through wireless LAN to cause
illegal instruction, eavesdropping, and loss or destruction of stored data.
TOSHIBA strongly recommends the customer to enable the encryption
function.
■
TOSHIBA is not liable for the eavesdropping of data due to the use of
Wireless LAN and the damage thereof.
Wireless LAN and the damage thereof.
Wireless communication switch
You can enable or disable RF transmission(Wireless LAN) functions on and
off, with this switch. No transmissions are sent or received when the switch
is off. Slide the switch toward the right of the computer to turn it on and
toward the left of the computer to turn it off.
off, with this switch. No transmissions are sent or received when the switch
is off. Slide the switch toward the right of the computer to turn it on and
toward the left of the computer to turn it off.
Turn the computer off when you enter an airplane and check the carrier’s
regulations before you use a computer on board.
regulations before you use a computer on board.
Wireless communication Indicator
The wireless communication indicator indicates the status of the wireless
communication functions.
communication functions.
Set the switch to off in airplanes and hospitals. Check the indicator.
It will stop glowing when the wireless communication function is off.
It will stop glowing when the wireless communication function is off.
Indicator status
Indication
Indicator off
Wireless communication switch is set to off.
Indicator glows
Wireless communication switch is on.
Wireless LAN is turned on by an application.
Wireless LAN is turned on by an application.