Справочник Пользователя для Toshiba SD-V390-S-TU

z

Make one of the following connections, depending on
the capabilities of your existing equipment.

Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).

If you use this connection, tune the TV to the
DVD+VCR’s RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel 
1. When the DVD+VCR is turned off, press and hold

CHANNEL

v or CHANNEL V on the front panel for

about five seconds. 

It will turn itself on and “RF 03” or “RF 04” appears in the
display window.

2. Press CHANNEL

v or CHANNEL V on the front

panel or CH/TRK (+/-) on the remote control to
change the RF output channel (CH 03 or CH 04).

3. Turn off and on the DVD+VCR.
4. Press the TV CH to 3 or 4 depending on the RF 

output channel you had selected.
Now you can watch the DVD+VCR playback on CH3
or CH4 of your TV.

1

Connect the DVD/VHS VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using the
video cable supplied (V).

2

Connect the Left and Right DVD/VHS AUDIO OUT
jacks on the DVD+VCR to the audio left/right in
jacks on the TV (A1) using the supplied audio
cables.

If you use this connection, set the TV’s source selector
to VIDEO.