Справочник Пользователя для Toshiba SD-V390-S-TU

You can set your own Personal Preferences on the
DVD+VCR.

1

Press SETUP.
The setup menu appears.

2

v/V to select the desired option.

The screen will show the current setting for the
selected option, as well as alternate setting(s).

3

B,

v/V to select the desired setting.

4

Press ENTER to confirm your selection.
Some options require additional steps.

5

Select a language for the disc’s Menu, Audio, and Subtitle.

Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to enter
the corresponding 4-digit number according to the language code
list on page 42. If you enter the wrong language code, press
CLEAR.

Disc Language selection may not work for some DVDs. 

Select a language for the setup menu. This is the menu
you see when you press SETUP.

4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.

Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure.
If you are using the COMPONENT VIDEO OUT jacks,
but are connecting the DVD Player to a standard (ana-
log) television, set Progressive Scan to Off.
If you are using the Component Video jacks for 
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.

– Progressive Scan is available only when the VIDEO

OUTPUT switch on the rear panel is set to COMPO-
NENT. 

Once the setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error,
you must reset the unit. Pointing the remote at the player,
press the STOP key to stop any disc that is playing. Next,
press the STOP key again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on
a conventional analog TV or monitor.