Инструкции По Обслуживанию для MiTAC w130
47
7-5 HDD Module
Disassembly Step:
1. Remove Bottom housing.
2. Carefully disconnected the IDE cable from the Mother Board and lift up
1. Remove Bottom housing.
2. Carefully disconnected the IDE cable from the Mother Board and lift up
the HDD module.
3. Disassembly the cable and two
Step 1
Reassemble Step:
1. Reassemble two Sponge to HDD and connect the IDE cable back to
HDD.
2. Carefully connect the IDE cable to Mother Board and put the HDD module
into the housing.
3. Reassemble the Bottom housing.