Инструкции По Обслуживанию для kymco mo movie125150
15
. IGNITION SYSTEM
15-4
IGNITION COIL
REMOVAL
Remove the frame body cover. (!2-2)
Remove the frame body cover. (!2-2)
Remove the spark plug cap.
Disconnect the ignition coil wires and remove
the ignition coil bolt and ignition coil.
INSPECTION
CONTINUITY TEST
CONTINUITY TEST
Measure the resistance between the ignition
coil primary coil terminals.
Resistance: 0.1_
Resistance: 0.1_
1.0W/20℃
Measure the secondary coil resistances with
and without the spark plug cap.
Resistances:
(with plug cap): 7_
Resistances:
(with plug cap): 7_
12KW/20℃
(without plug cap): 3_
5KW/20℃
1. Turn the CDI tester changeover switch to
12V and connect the ignition coil to the
tester.
2. Turn the tester power switch ON and
check the spark from the watch window.
_
Good
: Normal and continuous spark
_
Faulty : Weak or intermittent spark
This test is to inspect the continuity of
ignition coil.
＊
Ignition Coil
Correctly operate the tester following the
manufacturer‘s instructions.
＊