Инструкции По Обслуживанию для kymco mo x500

 

Warm up the engine to normal operating

temperature.

Stop the engine and remove the spark plug

cap and remove the spark plug (page 3-7).

Install a compression gauge into the spark

plug hole.

Open the throttle all the way and crank the

engine with the starter motor until the gauge

reading stops rising.
The maximum reading is usually reached 4 –

7 seconds.

Low compression can be caused by:
Œ Blown cylinder head gasket
Œ Improper valve adjustment
Œ Valve leakage
Œ Worn piston ring or cylinder

High compression can be caused by:
Œ Carbon deposits in combustion chamber or

on piston head

Park Plug Cap

                         

Compression Gauge

To avoid discharging the battery, do not

operate the starter motor for more than

seven seconds.

＊