Справочник Пользователя для BMW X5 2002

114

BMW Universal Transmitter

Programming

1 Channel keys

2 Indicator lamp

3 Receiver for programming

Read and comply with the safety
precautions on the previous

page.

1. Turn the ignition key to position 2
2. For initial use:

Press and hold both outside keys 1
until the indicator lamp 2 flashes, and
then release them. The three channel
keys are cleared

530us136

3. Hold the original hand-held trans-

mitter toward the receiver 3 a
maximum of 2 in (5 cm) away

4. Press the transmission key of the

original hand-held transmitter
(arrow 2) and the desired channel
key of the Integrated Universal
Remote Control (arrow 1) simulta-
neously. Release both keys as soon
as the indicator lamp flashes rapidly

5. To program other original hand-held

transmitters, repeat steps 3 and 4.

The corresponding channel key is now
programmed with the signal of the orig-
inal hand-held transmitter.

530us137

Programming a hand-held
transmitter with conversion code

Read and comply with the safety
precautions on the previous

page.

When programming the BMW Universal
Transmitter, consult the instructions for
the specific device. For using the BMW
Universal Transmitter with a conversion-
code system, note the following supple-
mental programming instructions:

A second person facilitates
programming of the BMW

Universal Transmitter.

1. Program the BMW Universal

Transmitter as described previously
under "Programming"

2. Press and hold the programming key

on the receiver of the device for
approx. two seconds until the
programming lamp on the device
comes on

3. Press the desired channel key of the

BMW Universal Transmitter three
times.

If you have additional questions,
please consult your BMW Sports

Activity Vehicle center.