Справочник Пользователя для BMW z4 2005

Скачать
Страница из 120
 59
Air distribution 
You can direct airflow onto the win-
dows 
, toward the upper body 
 
and into the footwell 
. All interme-
diate settings are possible.
Air supply/blower 
Turn the rotary control to adjust the 
air supply. Both heating and ventila-
tion become more effective as the air 
supply rate is increased.
Turn the rotary control toward zero: 
The blower and the heating are turned off, and 
the air supply is stopped.
Temperature 
In order to increase the temperature 
of the passenger compartment, turn 
to the right toward the red zone.
Air conditioning 
The air is cooled and dehumidified 
and, depending on the temperature 
setting, rewarmed.
Depending on the weather, the wind-
shield may fog over briefly when the engine is 
started.
Condensation forms during operation of 
the air conditioning system, which then 
exits under the vehicle. Traces of condensed 
water on the ground underneath the vehicle are 
thus normal.
<
Outside air/recirculated air mode 
If there are unpleasant odors in the 
outside air, you can temporarily block 
the supply of incoming air. The sys-
tem then recirculates the air currently 
within the vehicle.
If the windows fog over in the recirculated 
air mode, switch this mode off and 
increase the air supply as required. Do not use 
the recirculated-air mode continuously over a 
long period of time as this would otherwise 
reduce the air quality in the interior of the vehi-
cle.
<
Rear window defroster 
The indicator lamp lights up when 
the rear window defroster is active. 
The rear window defroster switches 
off automatically.
Ventilation 
You can adjust the blower controls for the upper 
body area to obtain the optimum airflow rates 
and directions for your personal requirements:
Rotary dials for opening and closing the 
vents at any setting desired
Slide for adjusting airflow direction
Microfilter
The built-in microfilter removes dust and pollen 
from the incoming air and in the recirculated air 
mode. Your BMW center will replace this filter 
during the regularly scheduled maintenance. A 
substantial reduction in airflow indicates that 
the filter needs to be replaced earlier.
Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG