Справочник Пользователя для BMW serie 7 1999

172

Changing tires

10 Take the alignment tool from the

onboard tool kit and insert it to-
gether with the plastic insert into
one of the bolt sockets (arrow)

11 Position on the spare wheel. Secure

it by screwing at least two lug bolts
into opposite sockets. Remove the
alignment tool

12 Screw in the remaining lug bolts.

Tighten all the bolts securely

13 Lower the jack and remove it from

beneath the car

14 Tighten the lug bolts, alternating

between bolts positioned opposite
one another

15 Wheels with hub covers: Position

the hub cover and press on tightly

390de093

16 If equipped with lug bolt covers:

Align the arrow on the cover with
the line in the wheel and press the
cover into place

17 Check and correct the air pressure

as soon as possible.

The vehicle jack is designed for
changing tires only. Do not at-

tempt to raise another vehicle model
with it or to raise any load of any kind.
To do so could cause accidents and
personal injury.
Have the lug bolts checked for proper
tightness with a calibrated torque
wrench at the earliest possibility (torque
specification: 72 lb.ft./100 Nm).

When storing the wheel, take care to
ensure that you do not damage the re-
taining pin in the spare tire recess.

When light-alloy wheels other than
Original BMW light-alloy wheels are fit-
ted to the car, it may be necessary to
use different lug bolts.

Replace the defective tire as soon as
possible and have the new wheel/tire
balanced.