Инструкции По Обслуживанию для kymco mo kxr 250

COOLANT LEVEL INSPECTION
Place the machine on the level ground.
Check the coolant level in the coolant

reservoir when the engine is cold as the

coolant level will vary with engine

temperature. The coolant level should be

between the maximum and minimum marks.
If the level is low, remove the coolant

reservoir cap, and then add coolant or

distilled water to raise it to the specified

level.
Recommended Coolant: SIGMA Coolant
         (Standard Concentration 30%)

Remove the front fender. (!2-5)
Remove the radiator cap.
Remove the drain bolt to drain the coolant.
Drain the coolant in the reserve tank.
Reinstall the drain bolt.

Coolant capacity: 1400cc
Radiator capacity: 1100cc
Reserve tank capacity: 300cc
Start the engine and check if there are no

bubbles in the coolant and the coolant level

is stable. Reinstall the radiator cap.
If there are bubbles in the coolant, bleed air

from the system.
Fill the reserve tank with the recommended

coolant up to the maximum mark.

The coolant level does not change no

matter the engine is warm or cold. Fill to

the maximum mark.

Perform this operation when the engine

is cold.

The coolant freezing point should be 5
°C lower than the temprature of the

riding area.

Minimum  Mark

Maximum  Mark

Coolant Reservoir Cap

Drain  Bolt