Справочник Пользователя для Siemens MC35
AT Command Set
MC35_ATC_01_V05.00
Page 51 of 256
15.07.2002
3.4 AT+FCIG Query or set the Local polling id
Test command
AT+FCIG =?
Response
(max. length of Local Polling ID string) (range of supported ASCII character
values) OK
values) OK
Parameter
See write command
Read command
AT+FCIG?
Response
<id> OK
Parameter
See write command
Write command
AT+FCIG =<id>
Response
OK
Parameter
<id>
Local Polling ID string, max. length and possible content as reported
by test command. Default value is empty string (“”).
by test command. Default value is empty string (“”).
Reference
EIA PN-2388
Note
3.5 AT+FCLASS Fax: Select, read or test service class
Test command
AT+FCLASS=?
See introduction to fax commands, pg. 49.
Response
(list of supported <n>s)
OK
OK
Parameter
See write command
Read command
AT+FCLASS?
Response
<n> OK
Parameter
See write command
Write command
AT+FCLASS=
<n>
<n>
The ME is set to a particular mode of operation (data, fax). This causes the MA
to process information in a manner suitable for that type of information.
to process information in a manner suitable for that type of information.
Response
OK
Parameter
<n>
0
data (e.g. EIA/TIA-602 or ITU V.25ter)
1
Fax class 1 (EIA/TIA-578-A, Service Class 1)
2
Fax class 2 (EIA/TIA SP-2388, an early draft version of
EIA/TIA-592-A – Service class 2.1)
EIA/TIA-592-A – Service class 2.1)
Reference
EIA/TIA-592-A
Note
Using Error Correcting Mode (ECM) when sending FAXes over GSM should be
avoided.
avoided.