Справочник Пользователя для Yamaha arius ydp-181

Recording Your Performance

Owner’s Manual

Before you begin to record, select the voice you want to record (or voices if you 
will be using Dual). Make any other desired settings (reverb, effect, etc.) as well. 
You might also want to set the volume.
You can also adjust the playback volume using the 

 slider.

Press the 

 button to engage Record Ready mode. This automatically selects 

an empty song for recording and makes the RIGHT part active. If an empty 
song does not exist, Song U01 will be selected. Recording does not actually start 
yet.
The 

 indicator will flash at the current METRONOME 

tempo setting.

You can turn on the metronome in this step, and adjust the tempo by using the

▼, ▲]

 buttons. (Range: 32 – 280)

Record Ready mode can be disengaged before recording by pressing the 

 

button again.

Recording will begin automatically as soon as you play a note on the keyboard 
or press the 

 button. The current measure’s number will 

appear on the display while recording.

Press either 

 or 

button to stop recording. When recording is 

stopped, dashes appear in the display in succession to indicate that the recorded 
data is being saved to the instrument automatically. After the data is saved, the 
song name (U01 – U03) appears in the display. The recorded part’s indicator 
will glow green to indicate that it now contains data. (Record mode is disen-
gaged automatically.)

Do not turn off the power of the instrument when dashes appear in the display in suc-
cession. Doing so may delete all song data in the instrument, including external songs 
(page 40).

When the instrument is in Demo 
Song mode or during a file opera-
tion, Record mode cannot be 
engaged.

This value in kilobytes (a unit 
used of measurement for data) 
indicates how much space 
remains available for recording on 
the instrument. You can record up 
to a maximum three songs, or up 
to a maximum of about 100KB 
(11,000 Notes) in each song on 
the instrument depending on 
pedal usage and other factors.

If you have selected the LEFT 
part previously in the same song, 
the LEFT part will automatically 
be made active when pressing 
the [REC] button in step 2.

If the metronome was on when 
you started recording, you’ll be 
able to keep time with the metro-
nome while recording, but the 
metronome sound will not be 
recorded.

For more recording information, 
see page 31.

The left pedal can be assigned to 
start recording via the “Left Pedal 
Mode” function described on 
page 47.

If the memory becomes full dur-
ing recording, “FUL” will appear 
on the display and recording will 
stop automatically. (All recorded 
data up to that point will be 
retained.)