Справочник Пользователя для Yamaha arius ydp-181

Скачать
Страница из 70
Keyboard Stand Assembly
Owner’s Manual
61
ENGLISH
8.
Set the adjuster.
Rotate the adjuster until it comes in firm contact 
with the floor surface.
9.
Attach the headphone hanger.
Install the headphone hanger using included two 
screws (4 x 10mm) as shown in the figure.
■ Connecting the pedal cord
Insert the pedal cord securely until the metal part of the
cord plug disappears from view. Otherwise, the pedal
may not function properly.
MIDI
Insert the cord all the 
way until the metal part 
of the plug disappears 
from view.
OFF
OFF
ON
ON
 NORM
AL
 NORMAL
(H
P
(HP
.SW
)
.SW)
SPEAK
ER
SPEAKER
PH
ON
ES 
PHONES 
After completing the assembly, please check the fol-
lowing.
• Are there any parts left over?
Review the assembly procedure and correct any 
errors.
• Is this instrument clear of doors and other movable 
fixtures?
Move the instrument to an appropriate location.
• Does this instrument make a rattling noise when you 
shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you step 
on the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into 
the sockets?
Check the connection.
• If the main unit creaks or is otherwise unsteady 
when you play on the keyboard, refer to the assem-
bly diagrams and retighten all screws.
CAUTION
When moving the instrument after assembly, always hold 
the bottom of the main unit.
Do not hold the key cover or top portion. Improper han-
dling can result in damage to the instrument or personal 
injury.
Hold here.
Do not hold here.
Do not hold here.