Справочник Пользователя для Yamaha elb01e1

Connections

9

ELB-01 Owner’s Manual

162

Determines the control of the expression pedal functions. Ordinarily, this 
control is set to Auto. Press the [D] button to make the indicator flash, then 
use the DATA CONTROL dial to select the setting.

 Internal and External is automatically switched.

 You can manually control the expression pedal even during 

M.D.R. playback.

 While playing the M.D.R. or receiving MIDI messages, the 

expression pedal is invalid. (The volume is controlled by the recorded data in 
a USB flash memory or received MIDI data.)

For setting the channels over which MIDI information will be transmitted. Any 
channel from 1 through 16 can be assigned to each keyboard, the Upper 
Keyboard, the Lower Keyboard and the Pedalboard. The MIDI messages on 
each keyboard will be sent on the channels set here. You must set the transmit 
channel here to match the receive channel of the connected device.

You can select the channel for the Upper Keyboard.
Press the [B] button to make the indicator flash, then use the DATA 
CONTROL dial to select the setting.

You can select the channel for the Lower Keyboard.
Press the [C] button to make the indicator flash, then use the DATA 
CONTROL dial to select the setting.

You can select the channel for the Pedalboard.
Press the [D] button to make the indicator flash, then use the DATA 
CONTROL dial to select the setting.

Deletes unnecessary MIDI data and keeps it from being transmitted from the 
Electone. Rhythm start/stop messages can be filtered on the Electone.
Successive presses [C] button alternates between being transmitted (Off ) and 
not transmitted (On).

<MIDI OUT CH> UK÷ 1›
LK¿ 2         PK÷ 3 

<MIDI OUT FILTER>  fi
’RHYTHM