Справочник Пользователя для Yamaha htr-5890
78
ZONE 2/ZONE 3
Using this unit’s internal amplifier
To use this unit’s internal amplifier, set ZONE 2 AMP to ON in SET MENU (see page 64).
The supplied remote control can be used to control
Zone 2/Zone 3. You can even select the input source and
control components located in the main room directly
from the second/third room regardless of the listening
condition in the main room.
Zone 2/Zone 3. You can even select the input source and
control components located in the main room directly
from the second/third room regardless of the listening
condition in the main room.
■
To enable Zone mode on the remote
control
control
You will be able to switch the remote control mode from
one room to another, and use the input selector,
STANDBY, SYSTEM POWER, MUTE and VOLUME +/
– to control the selected room.
one room to another, and use the input selector,
STANDBY, SYSTEM POWER, MUTE and VOLUME +/
– to control the selected room.
1
Repeat steps 1 and 2 of the procedure in
“Setting remote control codes” on page 66.
“Setting remote control codes” on page 66.
2
Press
l
/
h
to select “L:AMP”.
3
Press ENTER.
“2000” appears in the display window.
4
Enter the code number “2001”.
5
Press ENTER to set the number.
“OK” appears in the display window if setting was
successful.
successful.
6
Press LEARN to complete the Zone setup.
The remote control will be able to operate this unit
from Zone 2 or Zone 3.
from Zone 2 or Zone 3.
■
To control Zone 2/Zone 3
1
Press SELECT
k
repeatedly to display
“ZONE 2” or “ZONE 3” in the display window.
2
Press SYSTEM POWER to turn Zone 2 or
Zone 3 power on.
Zone 3 power on.
3
Press an input selector button to select the
input source you want to listen to in the
second/third room.
input source you want to listen to in the
second/third room.
The display window shows “2: name of selected
input” or “3: name of selected input” if the remote
control is in the Zone 2/Zone 3 mode.
input” or “3: name of selected input” if the remote
control is in the Zone 2/Zone 3 mode.
Signals input to V-AUX and PHONO jacks cannot be sent
to Zone 2/Zone 3.
to Zone 2/Zone 3.
R
L
+
–
PRESENCE/ ZONE 2
Second room
This unit
Remote controlling Zone 2/Zone 3
LEARN
Note
SELECT
or
DTV
DVR/VCR2
VCR 1
DVD
V-AUX
CBL/SAT
MD/TAPE
CD-R
PHONO
TUNER
CD
MULTI CH IN
SLEEP
INPUT MODE
A
B
01EN00_HTR5890U.book Page 78 Thursday, December 23, 2004 12:39 PM