Справочник Пользователя для Yamaha mt-1x

When setting the PHONES SELECT Switch to the

MONITOR position, these level controls are used for each

track to achieve a level balance for easy monitoring. Use

these controls freely and independently to maintain a

desired level balance during overdubbing operations,

when the addition of a new signal changes the volume.

When setting the PHONES SELECT Switch  to the

MONITOR position, use these pan controls for each track

to achieve the desired stereo positioning for each track.

Use these controls freely and independently to maintain

the desired stereo position balance during overdubbing

operations, when the addition of a new signal changes

the stereo image.

This control adjusts the volume of the headphones (See

page 9).

These four jacks are for the connection of microphones

or electric and electronic instruments. With a high input

impedance of 10K ohms, and a specified input level range

of -10dB to -50dB, a wide variety of instruments and

microphones can be used.

When directly connecting an electric guitar, the use of

an special electric guitar preamp to increase the input

level will assure recordings of better sound quality.

Plug a set of headphones into this jack for monitoring.

Please use headphones rated from 8-—0 ohms for best

results.

By connecting the optional FS-1 footswitch to this jack,

you can control punch-in/punch-out operations. by foot.