Справочник Пользователя для Escalade Sports 2l-6516-01

8

18

4

4

21

9

8

18

Locking casters
MUST be on opposite
sides of each other.

Do not place nut
on bolt #18.

Three holes
go toward
caster rail.

Locking casters
MUST be on opposite
sides of each other.

Bolt heads
MUST face
OUTWARD.

9

21

Attach safety latch
using this hole.

Attach hook end
of #13 spring
into this hole.

9

14

27

12

19

13

18

4

8

3

14

25

25

7. Place end protectors #25 on safety latch #14

as shown in detail A.

8. Attach safety latch #14 to upright assembly

#21 using the hole above  mounting plate #4.
Secure with bolt #8, spacer #19, safety latch
#14, and locknut #9.  Do not over tighten
locknuts, safety latches must be free to
pivot.

Secure the eyelet end of safety latch spring
#13 (See detail B) to upright assembly #21
with bolt #18 that was used in step 5, spacer
#12, washer #27, and locknut #9.  (See figure
5)

Using a pair of pliers hook spring #13 into
hole in safety latch #14.  (See figure 5)

9. Attach other safety latch to other frame

assembly the same way using step 7 and 8.

5. Attach two caster rail assemblies  to

upright #21 as shown in figure 4.
Placing the end with three holes
towards caster rail.  (See figure 4)
Secure using two bolts #8 in the top
holes, two bolts #18 in the bottom
holes, and two locknuts #9 on bolts
#8 ONLY.  Do not place locknut #9
on bolt #18 until instructed.  (See
figure 4)  Secure all bolts.

6. Attach remaining two caster  rail

assemblies to other upright #21 in
same manner.