Справочник Пользователя для Echo PPF-225

During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear 

of flammable debris during transportation or when storing, otherwise serious property damage or personal injury 

may result.

Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte-

nance which includes the following:

  1.  Store unit in a dry, dust free place, out of the reach of children.

Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark or serious personal 

injury may result.

  2.  Place the stop switch in the "OFF" position.

  3.  Remove accumulation of grease, oil, dirt and debris 

from exterior of unit.

Some tree sap and resins are corrosive. Thoroughly 

wash the guide bar and sprocket areas after each 

use, then coat metal parts with light oil.

  4.  Perform all periodic lubrication and services that 

are required.

  5.  Tighten all the screws and nuts.

  6.  Drain the fuel tank completely and pull the recoil 

starter handle several times to remove fuel from the 

carburetor.

  7.  Remove the spark plug and pour 7 cc (1/4 oz.) of 

fresh, clean, two-stroke engine oil into the cylinder 

through the spark plug hole.

    A.  Place a clean cloth over the spark plug hole.

    B.  Pull the recoil starter handle 2-3 times to  

 

 

distribute the oil inside the engine.

    C.  Observe the piston location through the spark  

 

plug hole.  Pull the recoil starter handle slowly  

 

until the piston reaches the top of its travel and  

 

leave it there.

8.  Install the spark plug (do not connect spark plug 

cable).

9.  Install the guide bar cover on the guide bar and saw 

chain during storage.