Справочник Пользователя для Echo Trimmer

Tools Required:  8 mm Wrench, Screwdriver

Parts Required: High Temperature automotive grease, Clean rag

IMPORTANT
Lower and upper drive shaft  must be lubricated with high
temperature automotive grease every 25 hours of operation,
otherwise drive shaft assembly overheating and failure can
result.

1. Loosen clamping knob (D).

2. Pull locator pin (A) and rotate 1/4 turn counter clockwise to

lockout position.

3. Remove lower drive shaft assembly.

4. Remove lower flex cable, wipe clean and apply a thin coat

(1/2 oz. (15ml)) of high temperature automotive grease.

5. Install lower flex cable. Carefully fit lower drive shaft assembly

into coupler (B) to decal assembly line (C) making sure inner
lower flex cable engages into the upper drive shaft mount.

1. Remove coupler from upper drive shaft assembly by loosening

clamping screw (E) and removing set screw (F).

2. Remove upper flex cable, wipe clean and apply a thin coat (1/2

oz. (15ml)) of high temperature automotive grease.

3. Install upper flex cable. Make sure that the flex cable engages

into the clutch mount and also into the coupler mount.

4. Install set screw (F) and tighten clamping screw (E).