Справочник Пользователя для Epson EMP-TW980

Part Names and Functions

Rear

Base

•

[SCART] input port

p.12

Connects to the component
(YCbCr or YPbPr) out port or D
out port of the video equipment.

•

[Trigger out] port

When the projector power
is turned on, a 12 V DC
signal is output from this port.
When the projector's power is
turned off or a problem with
operation occurs, the output
becomes 0 V to send the
projector's power ON/OFF
status to an external device.

•

[Video] input port

p.12

Connects to general video out
ports of the video equipment.

•

[HDMI ] input port

p.12

Connects to video equipment or a
computer that is HDMI-
compatible.

•

[S-Video] input port

p.12

Connects to the S-Video out ports of
the video equipment.

•

[RS-232C] port

Connects the projector to a computer
using an RS-232C cable. This port is
for control use and should not be used
by the customer.

•

Power inlet

p.14

Connects the power cable.

•

Main power switch

p.14

•

Security lock

p.54

•

Remote control
light-receiving
area

p.13

Receives signals
from the remote
control.

•

[PC] input port

p.12

Connects to the RGB out
port of the computer.

•

[Component] input port

p.12

Connects to the component (YCbCr or YPbPr ) out port of the
video equipment.

•

Suspension bracket fixing points (4 points)

p.48

Install the optional ceiling mount here when suspending the projector from a ceiling.

•

Air filter (air intake vent)

p.44, 46

Prevents dust and other foreign particles
from being drawn into the projector.
It should be cleaned periodically.

•

Lamp cover

p.46

Open this cover when replacing the lamp
inside.