Справочник Пользователя для Epson EMP-TW980

Problem Solving

■

■

Press 

 on the remote control or 

 on the projector’s control 

panel.

Turn on the main power switch at the rear of the projector.

Disconnect the power cable and then reconnect it.

p.14

Check the circuit breaker to see if power is being supplied. 

Press 

 on the remote control to cancel the blank function.

Check that the power for the connected equipment is turned on. If 
the "Messages" menu command has been set to "On", messages 
relating to the image signals will be displayed.
 

"Settings" - "Display" - "Messages" p.34

If a composite video   or S-Video

 

 signal is being inputÅ

If projection does not occur when the "Video Signal" menu 
command is set to "Auto", select the signal format that matches the 
signal source.

"Settings" - "Input Signal" - "Video Signal" p.34

If the signal source is connected to the [Component] or [D] input 
port
If projection does not occur when the "Component" in the "Input 
Signal" menu command is set to "Auto", set the signal format that 
matches the signal that is being projected from the connected 
equipment. 

"Settings" - "Input Signal" - "Component" p.34

If the VCR or DVD equipment is connected using a D SCART 
adapter 
Press 

 to set the signal format to "D/SCART".  

p.34

When still no images appear and the DVD equipment is connected, 
change the setting at the DVD equipment to RGB output.

Try resetting all of the current settings. 

p.35

If the connection is made while the power is already turned on, the 
function [Fn] key that switches the computer's video signal to 
external output may not work. Turn the power for the computer that 
is connected to the projector off and then back on again.

Set the image signal to output only externally.

Computer documentation, under a title such as "External 

output" or "Connecting an external monitor"