Справочник Пользователя для Siemens PAPBH

!

!

!

!

!

!

!

!

!

!

The PAPBH Paradigm PROFIBUS Host Adapter provides a communication

channel from a PROFIBUS-DP EN50170 Network to a Paradigm Operator
Interface (HMI). The PROFIBUS Network is connected to the PAPBH
(Paradigm PROFIBUS Host Adapter) through a 9-pin sub-miniature D-type
female connector. The PROFIBUS Network is isolated from the control
electronics using high-speed opto-couplers and isolated from the supply with a
DC/DC converter. Three LED’s provide status information. 

The PAPBH can be base mounted (using the 4 holes provided in the base

plate) or DIN rail mounted (using the optional DIN rail mounting kit).

In normal operation the PAPBH is intended to be connected via it’s HMI port

to the programming port of the HMI. Database download can still be carried out
via a connection from the PC to the PC port of the PAPBH. All connections are
made using standard Red Lion Controls programming cables. Configuration is
by the PROFIBUS Network Driver installed on the HMI programming port.

On power up the PAPBH polls the HMI for its Station Address and

configuration. During start up the PROFIBUS master attempts to parameterize
and configure the PAPBH. Following start up, data is exchanged between the
PAPBH and the HMI.

The PAPBH has passed the conformance test for PROFIBUS-DP Slave

Devices, Certificate No. Z00584. The PNO Identifier for this PROFIBUS
device is 0x00FC. The characteristics are described in GSD file
PCL00FC.GSD. A disk containing the GSD file and bitmap is included with
each PAPBH.

All safety related regulations, local codes and instructions that appear in the

manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

1. POWER REQUIREMENTS: 11 to 30 VDC @ 3.0 W

Power Up Current: 3 A @ 2 msec
Must use a Class 2 or SELV rated power supply.

2. SERIAL PORTS: 

PC Port: RS232 on an RJ-11 jack.
HMI Port: RS232 on an RJ-11 jack.
ProfiBus Port: RS485 on a DB9 connector

3. PHYSICAL DIMENSIONS: L = 5.52" (140.2 mm), W = 4.52" (114.8 mm),

H = 1.76" (44.7 mm)

4.  CONSTRUCTION: Steel base plate and cover. Installation Category I,

Pollution Degree 2

5. ENVIRONMENTAL CONDITIONS:  

Operating Temperature: 0 to 40 °C
Storage Temperature: -20 to 80 °C
Operating and Storage Humidity: 80% max. relative humidity (non-

condensing) from 0 °C to 40 °C.

Altitude: Up to 2000 meters

Bulletin No.  PAPBH-X
Drawing No.  LP0525
Effective  6/01

Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion-controls.com

PAPBH

PROFIBUS Host Adapter

PAPBH000

—

—

Programming Cable

PAPBH DIN Rail Mounting Kit
(Includes 4 clips and 8 screws)

P890301Z

PAPBHDIN