Справочник Пользователя для SMART Technologies sbid interactive display 6052i

CHAPTER 3 – SETTING UP THE INTERACTIVE DISPLAY

 

Making Power and Computer Connections

1. Connect the supplied VGA cable from your computer or SMART hub’s video 

output connection to the terminal pane. For more information, see Connecting 
External Equipment with the Terminal Panels on page 18.

2. Connect the supplied power cable from the AC IN connector in the interactive 

display’s bottom terminal panel to the AC power outlet.

NOTE
Optionally, you can cover the bottom terminal panel with the supplied cover to 
secure the cables. Six screws are supplied for this cover.

3. Connect the supplied power cable from the touch connection panel of the 

interactive display to the AC power outlet.

4. Connect the supplied USB 2.0 cable from the touch connection panel to a USB 

2.0 receptacle on the computer.

NOTE
USB 1.1 cables or receptacles result in reduced performance.

5. Connect your computer to the Internet.

IMPORTANT
If your interactive display was purchased with SMART Meeting Pro Premium, 
you require an Internet connection for software installation.

6. Connect the power cable from your computer to the wall outlet.