Справочник Пользователя для Tascam RS-232C HD-R1

TASCAM HD-R1

6–Folders and Playlists

Creating playlists

Setting the current playlist

In playlist playback mode, this unit plays audio files

(tracks) that have been added to the current playlist.
There are no playlists on a CF card that has just been

formatted. You can make as many playlists as needed.

NOTE

When the playback mode is set to Playlist, new files
created in recording are added to the current playlist.

Create playlists using the following procedures.
1 Press the

key.

The Main Menu appears.
2 Use the

SHUTTLE/DATA

wheel to select

Playlist

, and press the

ENTER

key.

The Playlist Menu appears.

NOTE

When the Home Screen is open, press the SKIP

≤ key

while pressing and holding the MENU key (SHIFT key) to
open the Playlist Menu directly.

3 Use the

SHUTTLE/DATA

wheel to select

Create

New Playlist

, and press the

ENTER

key.

A playlist called “

Playlist00

” is created,

and this playlist becomes the current playlist.

4 With

Playlist00 (current)

selected,

press the

ENTER

key.

A screen showing the contents of the playlist

opens. The newly created playlist does not have

any files yet, so only “

Add Entry

” is shown,

as in the following screen.

Add files to the playlist using the following

procedures
5 With “

Add Entry

” selected, press the

ENTER

key.

The files and folders at the top level of the card

appear.

To show the files and folders inside a folder,

select the folder and press the

ENTER

key.

6 Select the file that you want to add the playlist,

and press the

ENTER

key.

The file is added to the playlist.
The playlist content screen reopens, so you

can confirm that the file has been added to the

playlist. Instead of the “

Add Entry

” item,

“

Add Entry To Bottom

” appears if one

or more files have already been added.

7 To add more files to the playlist, select “

Add

Entry To Bottom

” and press the

ENTER

key.

The same screen appears as in procedure 5

above.

8 Select the file you want to add to the playlist

and press the

ENTER

key as in procedure 6

above.

The file is added to the end of the playlist, and

the playlist content screen reopens.

9 Repeat steps 7 and 8 as necessary.
You can also edit the names of playlists, as well as

copy and delete them. You can also change the order

of the added files, remove files from playlists, and

set playback start and end points, set Fade In and

Fade Out, and set playback volume, for example. For

how to conduct these operations, see “Playlist” in the

Owner’s Manual.

When the playback mode (See “Setting the playback

mode” on page 14) is set to Playlist, the playback

area is the current playlist. Use one of the following

operations to set the current playlist.

Using the menu to set the current playlist
1 Follow steps 1 and 2 in “Creating new playlists”

to open the Playlist Menu.

2 Use the

SHUTTLE/DATA

wheel to select the

desired playlist, and press the

ENTER

key.

This loads and becomes the current playlist.

Using the panel keys to set the current playlist
Press the

SKIP

≤ or

SKIP

µ keys while pressing

and holding the

MODE

key. The current playlist is

changed in alphabetical order.