Справочник Пользователя для Tascam RS-232C HD-R1
8
TASCAM HD-R1
3–Preparations for Use
Turning on the power
Inserting the CF card
Removing the CF card
Press the
POWER
switch on the front panel to turn the
power ON. After the unit starts-up, the display shows
the Home Screen.
To turn the power OFF, press the
POWER
switch
again.
This unit uses CF cards (type I and type II) for
This unit uses CF cards (type I and type II) for
recording and playback.
1 Open the CF card slot door on the front panel.
2 Insert the CF card.
3 Close the door.
4 Use the included security screws to fasten the
3 Close the door.
4 Use the included security screws to fasten the
door shut as necessary.
NOTE
You can set the unit to either display a warning message
or to automatically unmount the CF card when the CF card
slot door is opened. (See “System settings” in the Owner’s
Manual.)
Manual.)
The CF card can be removed when the unit’s power is
OFF or when it is not recording or playing a file.
CAUTION
Some data will be lost if the card is removed during record-
ing. If it is necessary to remove the card during recording,
press the STOP key and then remove it.